Engine Oil Pan Sump Tank Heater 220~240V 250W

Features
-Well waterproof performance, fast temperature rising, temperature uniformity,High thermal efficiency, well toughness
-Conform to the American UL94 level V0 flame resistant standard
-Easy to use, safe service life for ten years, not easy aging
-With European standard plug

Specifications
Material: Silicone rubber + fiberglass cloth
Size: 9 x 13cm
Wire length: 210cm
Color: orange
Voltage: 220 v, 250 w
Using range: All kinds of automobile fuel tank, water tank, storage battery, anti-freezing heat insulation
Usage:
Product with double-sided adhesive on the back, can be directly stick on the heated products, the highest heat resistance temperature to 200℃, will never fall off

Installation:
-Use pressure-sensitive adhesive to stick it on the flat and smooth artifacts
-The maximum service temperature of pressure sensitive adhesive: 150℃ Continuous temperature, 230℃instantaneous temperature. Power density is less than 0.9 W/c ㎡
-Silicone rubber heater with pressure sensitive adhesive should be used in half a year after processing, otherwise it will influence on the performance of the glue using

Instructions
-The electric heating device must pay attention to use, its working temperature should be less than 240 ℃, the continuous use instantaneous does not exceed 300 ℃.
-when the work temperature less than 240 ℃, the current density is up to 3 w/c ㎡
-Paste the type installation conditions, allowed working temperature less than 150 ℃
-Working voltage selection with high power high voltage, low power low voltage for the principle, special needs can be exceptions.

Package included
1 x Car heater tank